（本店為NUX香港獨家代理，產品全屬行貨，附有原裝保養，貨品上有NUX 提供的藍色認證貼紙，方為正貨）
NUX 專業樂器無線傳輸音頻系統,可以當結他調音器,可以當BOOST,又是DI , 支援SEND 及RETURN接駁， 可用於任何電子樂器傳送，包括（結他／電結他／BASS / 電子琴/電子鼓/電管樂等等)可用約長達50米距離,約6小時使用時間
Professional wireless Redefined!
NUX B-8 is a redefined wireless system with automatic setup, 2.4 GHz interference-free broadcasting frequency, and 24-bit 48 kHz high-quality audio transmitting. The signal transmitting latency is as low as 2.5ms at the best performance. The operation range is up to 50 meters (160-feet).
High quality audio 2.4 GHz broadcast
B-8 Wireless delivers the signal on 2.4 GHz frequency range. That's a global interference-free broadcasting range you can use everywhere without a signal break. With the 24-bit 48 KHz audio quality you will never experience unwanted sound degradation.
Long distance, low latency
With the latest transmitting technologies, the B-8 wireless system has the best performance for musicians. The operation range is up to 50 meters (160-feet). And, the latency is as low as 2.5ms when you set the transmitting at LOW LATENCY.
To achieve the best performance, you can adjust the transmitting parameter between LOW LATENCY and STABLE.
Stable mode for anti-interferrence
To achieve the best performance of transmitting, please fix the TX on your strap and use it as below. In this way the TX will have a distance from your body, which is good for transmitting.
To get the best performance, please check if there is any WI-FI devices around and set the B-8’s transmitting at the best position between low latency and stable
Built-in booster & tuner
It also comes with a build-in booster and well-designed digital tuner with Chromatic, Guitar Standard, Guitar Compensated, Bass tuning modes, which are very useful for musicians to perform with on stage.
Long battery lifetime
The TX features a large Li-ion battery inside and the battery lifetime is as long as 6.5 hours. You can easily put the TX on the top of the RX to recharge it.
CABLE TONE
The TX features a cable tone simulation which is normally used for some guitar players to get a warmer sound. If you want it, you can pull the switch and turn it on.
Send/return for routing
With the 1/4” OUTPUT/SEND jack, you can loop your effect pedals to RX with this jack for SEND (send the signal to your effect pedals), and loop your effect pedals to RX with the 1/4” RETURN jack for RETURN (return the signal to from your effect pedals to the RX).
Specifications
Operating Frequency Band
2400-2483.5MHz
Audio Quality
24bit/48kHz
Frequency Response
20Hz-20kHz
Latency
2.5ms(best performance setting)-8.7ms(safety mode)
Input Impedance
1 MΩ
Maximum Input Level
1 kHz at 1% THD +6.2 dBV (5.78 Vp-p)
THD+N
0.01% 1kHz, typical
Dynamic Range
122dB, A-weighted(OUTPUT/SEND)
Output level Adjustment Range
mute -64dB~0dB
Auto-sleep Mode
N/A
Built-in Battery Capacity
3.7V/500mAh Rechargeable Li-polymer (Transmitter)
TX Battery Life
up to 6.5 hours
Power Requirements
7V to 12V DC, 500mA min, negative tip power supplies(Receiver)
Operation Range
Up to 50 m (165 feet) maximum
TX dimesions
72.5mm*49.3mm*23mm (L*W*H)
TX weight
63g
RX dimensions
122*95*60mm (L*W*H)
RX weight
500g
