Belt-drive operation with two speeds: 33-1/3 and 45 RPM
Motor features a speed-sensor system to maintain accurate platter rotation speed
Full manual operation
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.
The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
AT-LPW40WN Specifications
Type
Belt-drive manual turntable
Motor
DC servo with Active Speed Stabilization
Drive method
Belt drive
Speeds
33-1/3 RPM, 45 RPM
Turntable Platter
Die-cast aluminum
Wow and Flutter
< 0.15% WRMS (33 RPM), 3kHz
Signal-To-Noise Ratio
>60dB
Maximum Output Level
Pre-amp (PHONO) 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp (LINE) 200 mV nominal at 1 kHz, 5 cm/sec
Gain
35 dB nominal, RIAA equalized
Power Supply
12 VDC; Power Adapter 100~240 V, 50/60 Hz, 0.5 A Max.
Dimensions
420.0 mm (W) x 340.0 mm (D) x 116.9 mm (H)
Weight
4.72kg
Accessories Furnished
Dust cover, Platter, Turntable mat, Drive belt,
Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge,
45-RPM adapter, RCA audio cable, AC adapter, Dust cover hinges
AT-LPW40WN Tonearm/Cartridge/Headshell Spec.
Tone Arm Type
Static balanced straight carbon tonearm
Effective Arm Length
223.6mm
Height of Tonearm Adjustment Range
18.6mm
Tracking Error Angle
Less than 2°
Anti-skating Range
0 ~ 3g
Applicable Cartridge Weight
12~17g
Replacement Styli
AT-VMN95E
Recommend Loading
47,000Ω
Output Voltage
4.0 mV (at 1 kHz, 5 cm/sec)
Stylus
0.3 x 0.7 mil elliptical
Tracking Force
1.8 to 2.2 g (standard 2.0 g)
Headshell Weight
8.5 g
