The convenience of wireless analog audio with the refined style of wood
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Motor features a speed-sensor system to maintain accurate platter rotation speed
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 SV headshell and AT-VM95E (black) Dual Moving Magnet phono cartridge with 0.3x0.7 mil elliptical stylus
The AT-VM95Ecartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
The AT-LPW50BT RW extends Audio-Technica’s line of fully manual, belt-drive wood turntables by adding the option of wireless connectivity. Now you can enjoy optimal high-fidelity audio reproduction from vinyl with your choice of wired or wireless operation.
The AT-LPW50BT RW features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a stunning rosewood-finished wood veneer, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.
The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and a matching matte-silver AT-HS4 SV headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high performance AT-VM95E cartridge, which comes with a 0.3x0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW50BT RW is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct wired connection to components with or without a dedicated phono input. The turntable also connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology.
audio technica AT-LPW50BT RW
AT-LPW50BT RW Specifications
Type
Belt-drive manual turntable
Motor
DC servo with Active Speed Stabilization
Drive method
Belt drive
Speeds
33-1/3 RPM, 45 RPM
Turntable Platter
Aluminum Die Casting
Wow and Flutter
< 0.15% WRMS (33 RPM) at 3 kHz
Signal-To-Noise Ratio
> 60 dB
Maximum Output Level
Pre-amp (PHONO) 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp (LINE) 200 mV nominal at 1 kHz, 5 cm/sec
Gain
35 dB nominal, RIAA equalized
Tone Arm Type
Static balanced straight tonearm
Effective Arm Length
223.6mm
Overhang
18.6mm
Tracking Error Angle
Less than 2.0°
Stylus pressure adjustment
0 to 3.0 g
Applicable Cartridge Weight
11.5 to 16.5g (including headshell)
Communication Systems
Bluetooth Version.5.2
Communication Output
15mW EIRP
Operating Range
Line of sight – approx. 10m
Frequency Range
2.402 GHz to 2.480 GHz
Modulation Mode
GFSK, Pi/4DQPSK, 8DPSK
Bluetooth Profile Support
A2DP
Audio Codec Support
SBC
Power Supply
DC 12V, 1.0A; AC Adapter 100 to 240 V, 50/60 Hz, 0.5 A Max.
Rating Capacity
1.8 W
Dimensions
420 mm × 340 mm × 126 mm (W × D × H)
Weight
5.5 kg
Accessories Furnished
Dust cover, Dust cover hinges, Rubber mat, Platter (with drive belt),
Counterweight, Headshell (AT-HS4 SV), VM stereo cartridge (AT-VM95E BK),
45RPM adapter, RCA audio cable, AC adapter
Replacement Styli
AT-VMN95E BK
