Fully Manual Belt-Drive Turntable
AT-LPW30BK
Optimal High-Fidelity Audio Reproduction
Sophisticated Styling
Fully manual operation, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
The AT-LPW30BK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with black wood veneer to limit low-frequency acoustical feedback.
The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW30BK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
AT-LPW30BK Specifications
Type
Belt-drive manual turntable
Motor
DC servo
Drive method
Belt drive
Speeds
33-1/3 RPM, 45 RPM
Turntable Platter
Die-cast aluminum
Wow and Flutter
< 0.15% WRMS (33 RPM), 3kHz
Signal-To-Noise Ratio
>60dB
Maximum Output Level
Pre-amp (PHONO) 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp (LINE) 200 mV nominal at 1 kHz, 5cm/sec
Gain
35 dB nominal, RIAA equalized
Power Supply
12 VDC; Power Adapter 100~240 V, 50/60 Hz, 0.5 A Max.
Dimensions
420.0 mm (W) x 340.0 mm (D) x 116.9 mm (H)
Weight
3.90kg
Accessories Furnished
Dust cover, Platter, Turntable mat, Drive belt,
Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge,
45-RPM adapter, RCA audio cable, AC adapter, Dust cover hinges
AT-LPW30BK Tonearm/Cartridge/Headshell Spec.
Tone Arm Type
Static balanced straight aluminum pipe tonearm
Effective Arm Length
223.6 mm
Height of Tonearm Adjustment Range
18.6 mm
Tracking Error Angle
Less than 2°
Anti-skating Range
0~3g
Applicable Cartridge Weight
12~17g
Replacement Styli
AT-VMN95C
Recommend Loading
47,000Ω
Output Voltage
4.0 mV (at 1 kHz, 5 cm/sec)
Stylus
0.6 mil bonded conical stylus
Tracking Force
1.8 to 2.2 g (standard 2.0 g)
Headshell Weight
6.1g
