Single-button stompbox gives you a range of stage-ready vocal echo effects in vintage to modern flavors
Timed repeats of your vocal add interest at just the right moment
13 wicked delay styles, including classic slap echo
Tap tempo control to keep your echoes right on the beat
Simple 3-knob interface gets you up and running in seconds
High-quality, low-noise mic preamp for pristine vocals
On/off foot switch for quick performance control
Analog button for an optional filtered echo sound from the days of tape recording
Allows chaining to other VOICETONE SINGLES vocal processors or DITTO MIC LOOPER to expand creative possibilities
Compatible with remote Mic Control using the TC Helicon MP-75 microphone
Rugged, road-worthy construction for years of dependable use
Under The Hood
Beneath VOICETONE E1’s sturdy, die-cast metal case, you’ll be getting the same quality processing you’ve come to expect from our flagship VoiceLive® vocal processors. You’ll also find a clean, quiet mic preamp that rivals high-end touring mixers, plus studio-quality analog to digital conversion. There’s even a USB connection for firmware updates.
Signature Echoes & Slapbacks
1. 13 wicked delay styles including slapback/flutter echoes, non-tempo matched echoes, timed echo styles and special FX echoes
2. Control the length of your repeats and precisely control echo level
3. Analog button for softer echo sound from the days of tape recording
4. Footswitch tapping matches echo repeats to your song’s tempo
Specification
Show more
Design
Size
Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm)
Depth: 2.3 inches (60 mm)
Weight
Weight: 0.92 lb. (0.42 kg)
Construction
Two part dies cast metal
Rubberized base
Connections
Analog Inputs
Connectors, balanced: Mic.: XLR
Mic Input Level @ 0 dBFS: -42dBu to +1dBu
EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu
Mic input SNR: >104 dB
Phantom Power: 24V (always on)
Analog Outputs
Output Impedance, Bal./Unbal.: 200/100 Ohm
Output Full Scale: +1 dBu
Dynamic Range: >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
Control
USB for firmware and control
Mic Control using TC Helicon MP-75
Safety And Regulations
Power
Power Supply (Supplied): 12V / 400mA
Power Consumption: 5.6W
Safety
EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
Environment
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C)
Humidity: Max. 90 % non-condensing
What's in the box?
Region specific power supply
USB cable
User guide