香港行貨~ 旺角門市~
這款2500W 的PA揚聲器非常適合用於課室教學,禮堂演講,音樂表演奏,婚禮僧場使用等......
2500 Watt 2 Way 12" Powered Loudspeaker with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking
Product Features
2 way full range loudspeaker for portable PA and installation applications
2,500 Watt power featuring KLARK TEKNIK Class-D technology
KLARK TEKNIK Digital Signal Processing for total system control
Speaker modelling includes accurate models of industry standard speakers
SCC (Spatial Contour Control)compensates frequency response in relation to physical speaker placement
ULTRANET digital audio networking connects to mixers and other sources
12" low frequency driver with low mass voice coil for improved transient response
High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
Fully featured user interface with LCD display for ease of navigation
PC remote control software downloadable at turbosound.com
Lightweight fibre glass reinforced composite enclosure
Rugged powder coated perforated steel mesh grille
Dual angle pole mount for accurate audience coverage
Multiple internal rigging points for installation applications
Mains input and link output on Neutrik powerCON connectors
iQ12
The 2,500-Watt iQ12 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 12" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel Klark Teknik Class-D power amplifier, the iQ12 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system's performance is managed by a sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels � and long-term reliability. iQ12's advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry's most-respected loudspeakers.
Klark Teknik also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ12's frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.
On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ12 features a mic/line switch and level control with signal present LED on each channel.
The iQ12 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ12 via PC computer, as well as DSP and speaker modelling firmware updates.
The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ12 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON * connectors.
Specification
Show less
System
Frequency Response
52 Hz – 18 kHz ±3 dB
45 Hz – 20 kHz -10 dB
Nominal Dispersion
80° H x 60° V @ -6 dB points
Maximum SPL
130 dB peak
Crossover type
Active
Transducers
1 x 12" (308.5 mm) LF driver
1 x 1" (25.4 mm) HF compression driver
Limiter
Independent HF, LF, peak and rms
Amplifier
Maximum output power*
2,500 W
Type
Class-D
Protection
Short circuit, open circuit, thermal
Connectors
Input A / B
2 x combo jack/XLR
Sensitivity
Line +4 dBu, mic -22 dBu, switchable
Input impedance
20 kO unbalanced, 40 kO balanced
Maximum input level
+21 dBu
Output A / B
2 x XLR Linked to input
Mix output
XLR, balanced
Output impedance
100 O unbalanced, 200 O balanced
Ultranet input/link
2 x RJ45
Mains Supply
Neutrik powerCON input 20A and link 15A
Controls
DSP
Rotary push-encoder Buttons for Process, Setup, Exit, Enter
Mixer section
2 x gain controls (channels A and B) 2 x Line/Mic switch
User DSP Functions
Factory EQ presets
Positioning, Sound mode, Sound modeling, FBQ
Display
LCD 128 x 32, blue backlit
Delay
0 - 300 ms
Equalisation
High and low shelving EQ
2 x parametric EQ
Limiter
Zero attack input limiter
Presets
20 total presets, 19 user-definable
Crossover
High Pass L-R 24 dB/oct
Protection
Lock-out function for all settings
Ultranet Digital Network
System
Cabling
Power Supply
Power consumption
150 W @ 1/8 max power
Voltage (fuses)
Enclosure
Dimensions (H x W x D)
609 x 370 x 370 mm (24.0 x 14.5 x 14.5")
Net weight
14.7 kg (32 lbs)
Construction
Injection-moulded polypropylene enclosure
Finish
Black painted
Grille
Powder coated perforated steel
Flying hardware
M10 x 3 points
Accessories
IQ12-WB Steel wall bracket
